New 60 cuft Steel Argon Cylinder

A 60 cf steel argon tank stands about 22.5 inches tall on its own, or roughly 28 inches with the valve, and 7 inches in diameter. At around 29 pounds empty it is easy to carry and secure in a shop or vehicle. This mid-size sits between the compact 40 cf bottle and the taller 80 cf and 125 cf cylinders.

At a typical shielding gas flow of 20 to 25 CFH, a 60 cf argon tank gives roughly 2.5 to 3 hours of arc time. Heavier MIG work or drafty conditions use gas faster, while light TIG passes stretch it further. If you weld often, an 80 cf or 125 cf tank reduces how frequently you refill.

Owned argon cylinders run from 20 cf and 40 cf bottles up through 60 cf, 80 cf, and 125 cf sizes. At 60 cf, this tank is a middle option for shop welders who want more capacity than a small bottle without the height of the largest cylinders. Match the size to how often you weld and how far you travel to refill.

Yes, this cylinder is rated for inert and mixed gases, so a supplier can fill it with a MIG blend such as 75 percent argon and 25 percent CO2 for steel. The cylinder does not set the blend, so tell the gas supplier the exact mix your MIG welder needs. Pure argon stays the choice for TIG and for MIG on aluminum.

This argon cylinder uses a CGA580 valve outlet with a 3/4 inch NGT thread, the standard inert-gas connection. A CGA580 argon or MIG flowmeter threads directly on, so most existing welding regulators fit. Confirm your regulator is CGA580 before the first fill.

The difference is capacity and height: the 80 cf holds more gas for longer welding runs, while the 60 cf is a little shorter and lighter for easier handling. Both use the same CGA580 connection, so one regulator fits either. Choose 60 cf for a lighter tank and 80 cf or more if you want fewer refills.

You own this cylinder outright once purchased, with no rental contract or recurring fees. Ownership lets you refill or exchange it at any qualified gas supplier and keeps long-term cost below renting. Keep your purchase and hydro-test records to prove ownership at exchange.

The purchase price is shown on this page, and refill cost is set by your local gas supplier and varies by region and gas purity. Because you own the cylinder, you can compare refill prices between welding suppliers rather than paying rental fees. Owners usually find the per-fill cost drops over time versus renting a bottle.

A high-pressure steel argon cylinder must be hydrostatically requalified on a set DOT interval, and the last test date is stamped into the collar. A qualified supplier checks that date at every fill and will requalify or decline an out-of-date cylinder. Buying new starts the clock fresh, so the next requalification is years away.

No, all cylinders ship empty for transport safety, so this tank must be filled before first use. Take it to a welding gas supplier that can provide argon or your chosen mix and fill to the marked service pressure. Once filled and fitted with a CGA580 regulator, it is ready for the welder.